Basic config files and utilities
What is running and who is it talking to?
Network security is a pretty broad topic, so I've broken it down into a couple of sections. In this area I cover the bottom 4 or so layers (transport, network, datalink, physical) of the 7 layer OSI protocol stack, the top 3 (application, presentation, session) are in the network server section and so forth (roughly speaking). I also cover some of the basic network configuration files, since an explanation is always useful.
PPP provides TCP-IP, IPX/SPX, and NetBEUI connections over serial lines (which can, of course, be attached to modems). It is the primary method most people use to connect to the Internet (virtually all dial-up accounts are PPP). A PPP connection essentially consists of two computing devices (a computer, a Palm Pilot, a terminal server, etc.) connected over a serial link (usually via modems). Both ends invoke PPP, authentication is handled (by one of several methods), and the link is brought up. PPP has no real support for encryption, so if you require a secure link you must invest in some form of VPN software.
Most systems invoke PPP in a rather kludgy way, you log in to the equipment (terminal server, etc.) and then as your login shell PPP is invoked. This of course means your username and password are sent in clear text over the line and you must have an account on that piece of equipment. In this case PPP does not handle the authentication at all. A somewhat safer method of handling this is to use PAP (Password Authentication Protocol). With PAP the authentication is handled internally by PPP, so you do not require a real account on the server. However the username and password is still sent in clear text, but at least the system is somewhat more secure due to the lack of real user accounts.
The third (and best) method for authentication is to use CHAP (Challenge Handshake Authentication Protocol). Both sides exchange public keys and use them to encrypt data sent during the authentication sequence. Thus your username and password are relatively safe from snooping, however actual data transfers are sent normally. One caveat with CHAP: Microsoft's implementation uses DES instead of MD5, making it slightly 'broken' if connecting with a Linux client. There are patches available however to fix this. PPP ships with almost every Linux distribution as a core part of the OS, the Linux PPP-HOWTO is available at: http://www.linuxdoc.org/HOWTO/PPP-HOWTO.html.
TCP-IP was created in a time and place where security wasn't a very strong concern. Initially the 'Internet' (then called Arpanet) consisted of very few hosts, all were academic sites, big corporations or government in nature. Everyone knew everyone else, and getting on the Internet was a pretty big deal. The TCP-IP suite of protocol is remarkably robust (it hasn't failed horribly yet), but unfortunately it has no real provisions for security (i.e. authentication, verification, encryption and so on). Spoofing packets, intercepting packets, reading data payloads, and so is remarkably easy in today's Internet. The most common attacks are denial of service attacks since they are the easiest to execute and the hardest to defeat, followed by packet sniffing, port scanning, and other related activities.
Hostnames don't always point at the right IP addresses and IP addresses don't always reverse lookup to the right hostname. Do not use hostname-based authentication if possible. Because DNS cache poisoning is relatively easy, relying on an IP address for authentication reduces the problem to one of spoofing, which is somewhat more secure but by no means truly secure. There are no mechanisms in wide spread use to verify who sent data and who is receiving it except by use of session or IP level encryption (IPSec/IPv6 and other VPN technologies are starting to gain momentum however).
You can start by denying inbound data that claims to originate from your network(s), as this data is obviously spoofed. And to prevent your users, or people who have broken into your network, from launching spoofed attacks you should block all outbound data that is not from your IP addresses. This is relatively simple and easy to manage but the vast majority of networks do not do it (I spent about a year pestering my ISP before they started). If everyone on the Internet had egress filters (that is restricted outbound traffic to that which is from their internal IP addresses) spoofing attacks would be impossible, and thus tracing attackers back to source would be far easier. You should also block the reserved networks (127.*, 10.*, etc.). I have noticed many attacks from the Internet with packets labeled as from those IP ranges. if you use network address translation (like IPMASQ) and do not have it properly firewalled you could be easily attacked or used to relay an attack to a third party.
If you must communicate securely with people, consider using VPN technology. The only available technology that has wide acceptance and is slated to become a the standard (in IPv6) is IPSec, it is an open standard supported by many vendors and most major vendors have actual working implementations native to their OS (although some are crippled to comply with US export laws). Please see Appendix B or the Encrypting Services and Data section for more details.
IPSec is covered in its own section. I think it is the future of VPN technology (its the most commonly supported standard as of today, and an integral part of IPv6).
IPv6 provides no security per se, but it does have built in hooks for future security enhancements, IPSec support and so on. If used on a network it would of course make life more difficult for an attacker as IPv6 use is not yet widespread. If you want to learn more visit: http://www.bieringer.de/linux/IPv6/. Linux currently supports IPv6 pretty much completely (one of the few OSs that does).
The HUNT Project is a set of tools for manipulating TCP-IP connections (typically on an Ethernet LAN), that is it can reset connections, spy on them and do otherwise naughty things. It also includes a variety of ARP based attacks and other mischievous sources of fun, You can get HUNT at: http://www.cri.cz/kra/.
inetd.conf is responsible for starting services, typically ones that do not need to run continuously, or are session based (such as telnet, or ftpd). This is because the overhead of running a service constantly (like telnet) would be higher then the occasional start up cost (or firing in.telnetd up) when a user wants to use it. For some services (like DNS) that service many quick connections, the overhead of starting the service every few seconds would be higher then constantly running it. Also with services such as DNS and email time is critical, a few seconds delay starting an ftp session won't hurt much. The man page for inetd.conf covers the basics (man inetd.conf). The service itself is called inetd and is run at boot time, so you can easily stop/start/reload it by manipulating the inetd process. Whenever you make changes to inetd.conf you must restart inetd to make the changes effective, killall -1 inetd will restart it properly. Lines in inetd.conf can be commented out with a # as usual (this is a very simple and effective way of disabling services like rexec). It is advisable to disable as many services in inetd.conf as possible, typically the only ones in use will be ftp, pop and imap. Telnet and r services should be replaced with SSH and services like systat/netstat and finger give away far to much information. Access to programs started by inetd can be easily controlled by the use of TCP_WRAPPERS.
The services file is a list of port numbers, the protocol and the corresponding name. The format is:
service-name port/protocol aliases # optional comment
time 37/udp timserver rlp 39/udp resource # resource location name 42/udp nameserver whois 43/tcp nicname # usually to sri-nic domain 53/tcp domain 53/udp
This file is used for example when you run 'netstat -a', and of course not used when you run 'netstat -an'
Using TCP_WRAPPERS makes securing your servers against outside intrusion is a lot simpler and painless then you would expect. TCP_WRAPPERS is controlled from two files:
hosts.allow is checked first, and the rules are checked from
first to last. If it finds a rule that explicitly allows you in
(i.e., a rule allowing your host, domain, subnet mask, etc.) it
lets you connect to the service. If it fails to find any rules
that pertain to you in hosts.allow, it then goes to check
hosts.deny for a rule denying you entry. Again it checks the
rules in hosts.deny from first to last, and the first rule it
finds that denies you access (i.e., a rule disallowing your host,
domain, subnet mask, etc.) means it doesn't let you in. If it
fails to find a rule denying you entry it then by default lets
you. If you are paranoid like me the last rule (or only rule if
you are going to a default policy of non-optimistic security)
which means all services, all locations, so any service not explicitly allowed is then blocked (remember the default is to allow). You might also want to just default deny access to say telnet and leave ftp wide open to the world. To do this you would have:
in.telnetd: 10.0.0.0/255.255.255.0 # allow access from my internal network of 10.0.0.* in.ftpd: 0.0.0.0/0.0.0.0 # allow access from anywhere in the world
in.telnetd: 0.0.0.0/0.0.0.0 # deny access to telnetd from anywhere
or if you wish to be really safe:
ALL: 0.0.0.0/0.0.0.0 # deny access to everything from everywhere
This may affect services such as ssh and nfs, so be careful!
You may wish to simply list all the services you are using separately:
in.telnetd: 0.0.0.0/0.0.0.0 ipop3d: 0.0.0.0/0.0.0.0
If you leave a service on that you shouldn't have in inetd.conf, and DO NOT have a default deny policy, you could be up the creek. It is safer (and a bit more work, but in the long run less work then rebuilding the server) to have default deny rules for firewalling and TCP_WRAPPERS, thus is you leave something on by accident, by default there will be no access to it. If you install something that users need access and you forget to put allow rules in, they will quickly complain that they can't get access and you will be able to rectify the problem quickly. Erring on the side of caution and accidentally denying something is a lot safer then leaving it open.
The man pages for TCP_WRAPPERS are very good and available by:
man hosts.allow man hosts_allow
and/or (they are the same man page):
man hosts.deny man hosts_deny
One minor caveat with TCP_WRAPPERS that recently popped up on Bugtraq, TCP_WRAPPERS interprets lines in hosts.allow and hosts.deny in the following manner:
1) strip off all \'s (line continuations), making all the lines complete (also note the max length of a line is about 2k, better to use multiple lines in some cases).
2) strip out lines starting with #'s, i.e. all commented out lines. Thus:
# this is a test # in.ftpd: 22.214.171.124 \ in.telnetd: 126.96.36.199
this means the "in.telnetd: 188.8.131.52" line would be ignored as well.
You cant start securing services until you know what is running. For this task ps and netstat are invaluable; ps will tell you what is currently running (httpd, inetd, etc) and netstat will tell you what the status of ports are (at this point were interested in ports that are open and listening, that is waiting for connections). We can take a look at the various config files that control network services.
The program ps shows us process status (information available in the /proc virtual filesystem). The options most commonly used are ps -xau, which show pretty much all the information youd ever want to know. Please note: these options vary across UNIX systems, Solaris, SCO, etc all behave differently (which is incredibly annoying). The following is typical output from a machine (using ps xau).
USER PID %CPU %MEM SIZE RSS TTY STAT START TIME COMMAND bin 320 0.0 0.6 760 380 ? S Feb 12 0:00 portmap daemon 377 0.0 0.6 784 404 ? S Feb 12 0:00 /usr/sbin/atd named 2865 0.0 2.1 2120 1368 ? S 01:14 0:01 /usr/sbin/named -u named -g named -t /home/named nobody 346 0.0 18.6 12728 11796 ? S Feb 12 3:12 squid nobody 379 0.0 0.8 1012 544 ? S Feb 12 0:00 (dnsserver) nobody 380 0.0 0.8 1012 540 ? S Feb 12 0:00 (dnsserver) nobody 383 0.0 0.6 916 416 ? S Feb 12 0:00 (dnsserver) nobody 385 0.0 0.8 1192 568 ? S Feb 12 0:00 /usr/bin/ftpget -S 1030 nobody 392 0.0 0.3 716 240 ? S Feb 12 0:00 (unlinkd) nobody 1553 0.0 1.8 1932 1200 ? S Feb 14 0:00 httpd nobody 1703 0.0 1.8 1932 1200 ? S Feb 14 0:00 httpd root 1 0.0 0.6 776 404 ? S Feb 12 0:04 init  root 2 0.0 0.0 0 0 ? SW Feb 12 0:00 (kflushd) root 3 0.0 0.0 0 0 ? SW Feb 12 0:00 (kswapd) root 4 0.0 0.0 0 0 ? SW Feb 12 0:00 (md_thread) root 64 0.0 0.5 736 348 ? S Feb 12 0:00 kerneld root 357 0.0 0.6 800 432 ? S Feb 12 0:05 syslogd root 366 0.0 1.0 1056 684 ? S Feb 12 0:01 klogd root 393 0.0 0.7 852 472 ? S Feb 12 0:00 crond root 427 0.0 0.9 1272 592 ? S Feb 12 0:19 /usr/sbin/sshd root 438 0.0 1.0 1184 672 ? S Feb 12 0:00 rpc.mountd root 447 0.0 1.0 1180 644 ? S Feb 12 0:00 rpc.nfsd root 458 0.0 1.0 1072 680 ? S Feb 12 0:00 /usr/sbin/dhcpd root 489 0.0 1.7 1884 1096 ? S Feb 12 0:00 httpd root 503 0.0 0.4 724 296 2 S Feb 12 0:00 /sbin/mingetty tty2 root 505 0.0 0.3 720 228 ? S Feb 12 0:02 update (bdflush) root 541 0.0 0.4 724 296 1 S Feb 12 0:00 /sbin/mingetty tty1 root 1372 0.0 0.6 772 396 ? S Feb 13 0:00 inetd root 1473 0.0 1.5 1492 1000 ? S Feb 13 0:00 sendmail: accepting connections on port 25 root 2862 0.0 0.0 188 44 ? S 01:14 0:00 /usr/sbin/holelogd.named /home/named/dev/log root 3090 0.0 1.9 1864 1232 ? S 12:16 0:02 /usr/sbin/sshd root 3103 0.0 1.1 1448 728 p1 S 12:16 0:00 su -root 3104 0.0 1.3 1268 864 p1 S 12:16 0:00 -bash root 3136 0.0 1.9 1836 1212 ? S 12:21 0:04 /usr/sbin/sshd
The interesting ones are: portmap, named, Squid (and its dnsserver, unlinkd and ftpget children processes), httpd, syslogd, sshd, rpc.mountd, rpc.nfsd, dhcpd, inetd, and sendmail (this server appears to be providing gateway services, email and NFS file sharing). The easiest way to learn how to read ps output is go over the ps man page and learn what the various fields are (most are self explanatory, such as %CPU, while some like SIZE are a bit obscure: SIZE is the number of 4k memory pages a program is using). To figure out what the running programs are a safe bet is man <command_name>; which almost always gives you the manual page pertaining to that service (such as httpd). You will notice that services like telnet, ftpd, identd and several others do not show up even though they are on. This is because they are run from inetd, the superserver. To find these services look at /etc/inetd.conf or your netstat vat output.
netstat tells us pretty much anything network-related that you can imagine. It is especially good at listing active connections and sockets. Using netstat we can find which ports on which interfaces are active. The following output is from a typical server using netstat vat.
Active Internet connections (including servers) Proto Recv-Q Send-Q Local Address Foreign Address State tcp 0 0 184.108.40.206:80 220.127.116.11:3661 ESTABLISHED tcp 0 0 0.0.0.0:1036 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN tcp 0 0 10.0.0.10:53 0.0.0.0:* LISTEN tcp 0 0 18.104.22.168:53 0.0.0.0:* LISTEN tcp 0 0 127.0.0.1:53 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:139 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:25 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:2049 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:635 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:21 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN udp 0 0 127.0.0.1:1031 0.0.0.0:* udp 0 0 0.0.0.0:1029 0.0.0.0:* udp 0 0 0.0.0.0:800 0.0.0.0:* udp 0 0 0.0.0.0:1028 0.0.0.0:* udp 0 0 10.0.0.10:53 0.0.0.0:* udp 0 0 22.214.171.124:53 0.0.0.0:* udp 0 0 127.0.0.1:53 0.0.0.0:* udp 0 0 10.1.0.1:138 0.0.0.0:* udp 0 0 10.1.0.1:137 0.0.0.0:* udp 0 0 10.0.0.10:138 0.0.0.0:* udp 0 0 10.0.0.10:137 0.0.0.0:* udp 0 0 0.0.0.0:138 0.0.0.0:* udp 0 0 0.0.0.0:137 0.0.0.0:* udp 0 0 0.0.0.0:2049 0.0.0.0:* udp 0 0 0.0.0.0:635 0.0.0.0:* udp 0 0 0.0.0.0:514 0.0.0.0:* udp 0 0 0.0.0.0:111 0.0.0.0:* raw 0 0 0.0.0.0:1 0.0.0.0:* raw 0 0 0.0.0.0:6 0.0.0.0:*
Numeric output is in my opinion easier to read (once you memorize /etc/services). The interesting fields for us are the first field, type of service, the fourth field which is the IP address of the interface and the port, the foreign address (if not 0.0.0.0.* means someone is actively talking to it), and the port state. The first line is a remote client talking to the web server on this machine (port 80). We then see the www server listening on 0.0.0.0:80 which means all interfaces, port 80, followed by the DNS server running on all 3 interfaces, a samba server (139), a mail server (25), an NFS server (2049) and so on. You will notice the ftp server (21) listed, even though it is run out of inetd, and not currently in use (i.e. no one is actively ftping in), it is listed in the netstat output. This makes netstat especially useful for finding out what is active on a machine, making an inventory of active and inactive network related software on the server much easier.
lsof is a handy program similar in idea to ps, except that it prints out what files/etc are open, which can include network sockets. Unfortunately your average lsof puts out a lot of information, so you will need to use grep or redirect it through less (lsof | less) to make it easier to read.
squid 9726 root 4u inet 78774 TCP localhost:2074->localhost:2073 (ESTABLISHED) squid 9726 root 5u inet 78777 TCP localhost:2076->localhost:2075 (ESTABLISHED) squid 9726 root 6u inet 78780 TCP localhost:2078->localhost:2077 (ESTABLISHED) squid 9726 root 7w CHR 1,3 6205 /dev/null squid 9726 root 14u inet 78789 TCP host1:3128 (LISTEN) squid 9726 root 15u inet 78790 UDP host1:3130 squid 9726 root 16u inet 78791 UDP host1:3130 squid 9726 root 12u inet 167524 TCP host1:3128->host2:3630 (ESTABLISHED) squid 9726 root 17u inet 167528 TCP host1:3424->www.example.org:http (SYN_SENT)
This example shows that we have Squid running, listening on ports 3128 and 3130, the last two lines show an open connection from an internal host to the Squid server and the resulting action Squid has taken to fulfill the request (going to www.example.org). host1 is the Squid server and host2 is the client machine making the request. This is an invaluable tool for getting a precise image of what is going on network wise with your server. You can get lsof with some distributions. Please note that versions of lsof compiled for kernel version 2.0.x will not work with kernel 2.2.x and vice versa, as there were too many changes. The primary site for lsof is at: ftp://vic.cc.purdue.edu/pub/tools/unix/lsof/.
There are a variety of routing software packages available for Linux. Most of them support the newer routing protocols which have a much higher degree of security then the older protocols such as RIP.
routed is one of the standard routing packages available for Linux. It supports RIP (about the oldest routing protocol still in service), and thats it. RIP is very simple, routers simply broadcast their routing tables to neighboring routers, resulting (in theory) in a complete routing table that contains entries for every destination on the Internet. This method is fundamentally insecure, and very inefficient outside of small secure networks (in which case it probably is not needed). Securing it is really not possible, you can firewall ports 520 and 521 which RIP uses to transfer data, however this can result in routes you want not getting through, and attackers can still spoof routes. Running this service is a very bad idea.
gated is a more advanced piece of routing software then routed. It supports RIP versions 1 and 2, DCN HELLO, OSPF version 2, EGP version 2, and BGP versions 2 through 4. Currently the most popular routing protocol seems to be BGP (Border Gateway Protocol), with OSPF gaining popularity (OSPF has built in security, is very efficient, and quite a bit more complicated).
MRT (Multi-threaded Routing Toolkit) is a routing daemon and test toolkit that can handle IPv4 and IPv6. You can get it at: http://www.mrtd.net/.
zebra is much more featured then gated, and sports a nice Cisco style command line interface. It runs as a daemon, and is multi threaded for performance, each protocol (RIP, OSPF, etc.) has its own configuration, and you can run multiple protocols simultaneously (although this could lead to confusion/problems). There is a master configuration port, and a port for each protocol:
zebrasrv 2600/tcp # zebra service zebra 2601/tcp # zebra vty ripd 2602/tcp # RIPd vty ripngd 2603/tcp # RIPngd vty ospfd 2604/tcp # OSPFd vty bgpd 2605/tcp # BGPd vty ospf6d 2606/tcp # OSPF6d vty
I would advise firewalling these ports. Access is controlled by a login password, and access to command functions requires another password (using the same syntax as Cisco, enable). You can download zebra from: http://www.zebra.org/.
Written by Kurt Seifried